Why is the water pressure from my water heater so low?
The problem of water pressure arises due to it being from a household water supply. The water heater only heats up the water from the existing water pressure supplied to the heater. If you would like to boost up water pressure from your existing heater, you can get the water heater models with built-in booster pumps or get a centralised booster pump for your household.
Why is my shower heater not hot enough even when turned to the maximum heat?
Rainy seasons - Incoming water supply will be cooler compared to normal days, causing a drop in output temperature.Turn the temperature control knob to max and reduce water flow rate by
- turning the stop valve's regulator to a lower flow, - turning the pump speed control to a lower speed.
Due to too much water flow, high water pressure (more than 40 psi) means higher flow rate or drop in power supply's voltage. Main voltage supply too low- below 200 Vac.*In general, a high water flow rate and low power input (fluctuation of voltage) will cause lower output temperature.
Because a different hand shower set is used other than the one supplied by the manufacturer.Use only the hand shower supplied by the manufacturer, which has been designed to have a low flow rate of water.
What are the advantages of using an instant heater?
The advantages of instant water heaters are that they provide a continuous flow of hot water while conserving energy (as compared to a limited flow of hot water which is continuously being heated up from conventional storage water heaters). Instant water heaters also minimize energy costs by providing hot water only when necessary.